geometric_design2a

# geometric_design2a - Dr. Antonio A. Trani Professor of...

This preview shows pages 1–7. Sign up to view the full content.

CEE 4674 – Airport Planning and Design (copyright A. Trani) 1 Dr. Antonio A. Trani Professor of Civil Engineering Virginia Polytechnic Institute and State University February 25, 2009 Blacksburg, Virginia

This preview has intentionally blurred sections. Sign up to view the full version.

View Full Document
CEE 4674 – Airport Planning and Design (copyright A. Trani) Organization of this Presentation Geometric design standards for runway exits Examples Design rationale for taxiways and taxilanes 2
CEE 4674 – Airport Planning and Design (copyright A. Trani) Geometric design Standards for Runway Exits Sources: FAA AC 5300-13 (Chapter 3) ICAO Aerodrome Manual Volumes 1 and 2 Design principle: Provide ample space for aircraft to maneuver out of the runway Make the runway exits easily identifyable 3

This preview has intentionally blurred sections. Sign up to view the full version.

View Full Document
CEE 4674 – Airport Planning and Design (copyright A. Trani) Right-Angle Exits Baseline centerline radius is 250 feet Pavement edge radius varies according to runway width 4
CEE 4674 – Airport Planning and Design (copyright A. Trani) Sample Implementation (ATL) 5 R = 250 feet Runway (150 feet wide) Parallel Taxiway 90 degree Runway Exit Source: Google Earth

This preview has intentionally blurred sections. Sign up to view the full version.

View Full Document
CEE 4674 – Airport Planning and Design (copyright A. Trani)
This is the end of the preview. Sign up to access the rest of the document.

## This note was uploaded on 01/07/2012 for the course CEE 4674 taught by Professor Staff during the Fall '11 term at Virginia Tech.

### Page1 / 21

geometric_design2a - Dr. Antonio A. Trani Professor of...

This preview shows document pages 1 - 7. Sign up to view the full document.

View Full Document
Ask a homework question - tutors are online