This preview shows pages 1–2. Sign up to view the full content.
This preview has intentionally blurred sections. Sign up to view the full version.View Full Document
Unformatted text preview: 02230 . Stockpile this additional topsoil with previously stripped topsoil. 3.2 PERFORMANCE A. Site Tolerances 1. Maximum variation from required grades shall be 1 / 10 of one foot. 2. To allow for final finish grades of parking lot and planting areas, rough grade elevations before placing topsoil are -a. Sod Areas - 7 inches below top of walk or curb. b. Seeded Areas And Ground Cover Areas - 6 inches below top of walk or curb. c. Shrub Areas - 15 inches below top of walk or curb B. When existing grade around existing plants to remain is higher than new finish grade, perform regrading by hand. Do not expose or damage shrub or tree roots. C. Compact fills as specified in Section 02315 . D. If soft spots, water, or other unusual and unforeseen conditions affecting grading requirements are encountered, stop work and notify Architect. END OF SECTION...
View Full Document
This note was uploaded on 01/11/2012 for the course CM 105 taught by Professor Burr,k during the Winter '08 term at BYU.
- Winter '08