02513 - Project Number 1 Section 02513 Heritage May 2003...

Info iconThis preview shows pages 1–2. Sign up to view the full content.

View Full Document Right Arrow Icon

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: Project Number 1 Section 02513 Heritage May 2003 Fire Suppression Water Distribution SECTION 02513 FIRE SUPPRESSION WATER DISTRIBUTION PART 1 GENERAL 1.1 SUMMARY A. Includes But Not Limited To 1. Perform excavation and backfill required for installation of work of this Section. 2. Furnish and install fire water system as described in Contract Documents. 3. Furnish and install connection to water main. B. Related Sections 1. Section 02051 - General Site Construction Requirements 2. Section 02315 - Procedure and quality of excavating, backfilling, and compacting 3. Section 08712 - Padlock for post indicator valve. 1.2 REFERENCES A. American National Standards Institute / American Water Works Association 1. ANSI A21.10 / AWWA C 110-93, 'Fittings, 3 inch through 48 inch, for Water and Other Liquids, Gray-Iron and Ductile-Iron' 2. ANSI A21.11 / AWWA C 111-90, 'Rubber Gasket Joints for Ductile-Iron and Gray-Iron Pressure Pipe and Fittings' 3. ANSI A21.50 / AWWA C 150-91, 'Thickness Design of Ductile-Iron Pipe' 4. ANSI A21.51 / AWWA C 151-91, 'Ductile-Iron Pipe, Centrifugally Cast, in Metal Molds or Sand-Lined Molds for Water or Other Liquids' B. American Society For Testing And Materials 1. ASTM A 126-95, 'Standard Specification for Gray Iron Castings for Valves, Flanges, and Pipe Fittings' 2. ASTM A 197-87 (1992), 'Standard Specification for Cupola Malleable Iron' 3. ASTM A 307-97, 'Standard Specification for Carbon Steel Bolts and Studs 60 000 psi Tensile Strength' 4. ASTM A 506-93, 'Standard Specification for Steel, Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled, Regular Quality and Structural Quality' 5. ASTM A 575-96, 'Standard Specification for Steel Bars, Carbon, Merchant Quality, M-Grades' C. American Water Works Association 1. AWWA C 502-85, 'Specification for Dry Barrel Fire Hydrants' D. National Fire Protection Association 1. NFPA 13-1991, 'Standard for the Installation of Sprinkler Systems' 2. NFPA 24-1992, 'Standard for the Installation of Private Fire Service Mains and Their Appurtenances' 1.3 QUALITY ASSURANCE...
View Full Document

This note was uploaded on 01/11/2012 for the course CM 105 taught by Professor Burr,k during the Winter '08 term at BYU.

Page1 / 4

02513 - Project Number 1 Section 02513 Heritage May 2003...

This preview shows document pages 1 - 2. Sign up to view the full document.

View Full Document Right Arrow Icon
Ask a homework question - tutors are online