03152

03152 - SECTION 03152 ANCHORS AND INSERTS PART 1 GENERAL...

Info iconThis preview shows pages 1–2. Sign up to view the full content.

View Full Document Right Arrow Icon
Project Number 1 Section 03152 Heritage May 2003 Anchors And Inserts SECTION 03152 ANCHORS AND INSERTS PART 1 GENERAL 1.1 SUMMARY A. Products Supplied But Not Installed Under This Section 1. Concrete anchors and inserts not specified elsewhere. B. Related Sections 1. Section 03313 - Installation 2. Division 5 - Quality of anchor bolts. 1.2 SUBMITTALS A. Product Data - Manufacturer’s product literature for each item. B. Quality Control - Manufacturer’s written recommendations for each item. PART 2 PRODUCTS 2.1 MANUFACTURED UNITS A. Adhesive Anchors 1. Acceptable Products And Manufacturers - a. HIT HY-150 System by Hilti b. EPCON System by ITW Ramset / Redhead c. SET Adhesive by Simpson d. Ultrabond by U S Anchor 2. For hold down anchors use epoxy that meets ICBO AC58 criteria for seismic and high wind applications. a. epoxy anchors are only to be used for hold downs where the specified cast-in-place anchors cannot be utilized. B.
Background image of page 1

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon
Image of page 2
This is the end of the preview. Sign up to access the rest of the document.

Page1 / 2

03152 - SECTION 03152 ANCHORS AND INSERTS PART 1 GENERAL...

This preview shows document pages 1 - 2. Sign up to view the full document.

View Full Document Right Arrow Icon
Ask a homework question - tutors are online