05080

05080 - SECTION 05080 FACTORY-APPLIED METAL COATINGS PART 1...

Info iconThis preview shows pages 1–2. Sign up to view the full content.

View Full Document Right Arrow Icon
Project Number 1 Section 05080 Heritage May 2003 Factory-Applied Metal Coatings SECTION 05080 FACTORY-APPLIED METAL COATINGS PART 1 GENERAL 1.1 SUMMARY A. Includes But Not Limited To 1. Quality of factory- or shop-applied priming applied to steel supplied to Project without finish coat. 2. Quality of and procedures for field touch-up and repair of factory-applied priming and galvanizing. B. Related Sections 1. Sections under 09900 heading - Finish painting 1.2 REFERENCES A. American Society For Testing And Materials 1. ASTM A 780-00, ‘Practice for Repair of Damaged and Uncoated Areas of Hot-Dip Galvanized Coatings’ 2. ASTM B 695-00, ‘Standard Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel’ 1.3 SUBMITTALS A. Product Data - Product data and samples, if requested by Architect 1.4 QUALITY ASSURANCE A. Pre-Installation Conference - Meet with Architect before commencing repair of galvanized surfaces to establish extent of repairs required and, if applicable, choice of methods to be used. PART 2 PRODUCTS 2.1 MATERIALS A. Factory- And Shop-Applied Primer - Compatible with and of equal or better quality than finish paint system to be applied by Sections under 09900 heading. Primer on unexposed, unfinished surfaces may be fabricator's standard shop coat. B.
Background image of page 1

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon
Image of page 2
This is the end of the preview. Sign up to access the rest of the document.

This note was uploaded on 01/11/2012 for the course CM 105 taught by Professor Burr,k during the Winter '08 term at BYU.

Page1 / 2

05080 - SECTION 05080 FACTORY-APPLIED METAL COATINGS PART 1...

This preview shows document pages 1 - 2. Sign up to view the full document.

View Full Document Right Arrow Icon
Ask a homework question - tutors are online