06165

06165 - SECTION 06165 WOOD PANEL PRODUCT SHEATHING PART 1...

Info iconThis preview shows pages 1–2. Sign up to view the full content.

View Full Document Right Arrow Icon
Project Number 1 Section 06165 Heritage May 2003 Wood Panel Product Sheathing SECTION 06165 WOOD PANEL PRODUCT SHEATHING PART 1 GENERAL 1.1 SUMMARY A. Includes But Not Limited To 1. Furnish and install wood panel product sheathing required for walls, roofs, and floors as described in Contract Documents. 1.2 SUBMITTALS A. Quality Assurance / Control - Technical and engineering data on fasteners to be set by pneumatic devices for Architect's approval of types proposed to be used as equivalents to specified hand set nails. 1.3 QUALITY ASSURANCE A. Pre-Installation Conference - Participate in pre-installation conference specified in Section 06110. 1.4 DELIVERY, STORAGE, AND HANDLING A. Protect sheathing and keep under cover in transit and at job site. B. Do not deliver material unduly long before it is required. C. Store sheathing on level racks and keep free of ground. Stack to insure proper ventilation and drainage. PART 2 PRODUCTS 2.1 MATERIALS A. Sheathing 1. Meet requirements of PS 1-95 / ANSI A199.1, PS 2-92, PRP-108, or PRP-133. . a. Except where plywood is specifically indicated on Drawings, performance rated waferboard, composite board, and oriented strand board (but not structural particle
Background image of page 1

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon
Image of page 2
This is the end of the preview. Sign up to access the rest of the document.

This note was uploaded on 01/11/2012 for the course CM 105 taught by Professor Burr,k during the Winter '08 term at BYU.

Page1 / 4

06165 - SECTION 06165 WOOD PANEL PRODUCT SHEATHING PART 1...

This preview shows document pages 1 - 2. Sign up to view the full document.

View Full Document Right Arrow Icon
Ask a homework question - tutors are online