07213

07213 - SECTION 07213 RIGID INSULATION PART 1 GENERAL 1.1...

Info iconThis preview shows pages 1–2. Sign up to view the full content.

View Full Document Right Arrow Icon
Project Number 1 Section 07213 Heritage May 2003 Rigid Insulation SECTION 07213 RIGID INSULATION PART 1 GENERAL 1.1 SUMMARY A. Includes But Not Limited To 1. Furnish and install on interior side of perimeter foundation walls and under floor slabs as described in Contract Documents. 1.2 REFERENCES A. American Society For Testing And Materials 1. ASTM C 578-00, 'Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation' 2. ASTM C 1289-01, ‘Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board’ PART 2 PRODUCTS 2.1 MATERIALS A. Type 1 Insulation 1. Meet requirements of ASTM C 578, Type IV. 2. Acceptable Products - a. Amofoam CM by Pactiv Building Products, Atlanta, GA (800) 241-4402 www.pactivbuildingproducts.com b. Foamular 250 by Owens Corning, Toledo, OH (800) 828-7155 or (973) 267-1605 www.owens-corning.com c. Styrofoam SM by Dow Chemical, Midland, MI (800) 441-4369 or (517) 832-1461 www.dow.com d. Equal as approved by Architect before bidding. See Section 01600.
Background image of page 1

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon
Image of page 2
This is the end of the preview. Sign up to access the rest of the document.

Page1 / 2

07213 - SECTION 07213 RIGID INSULATION PART 1 GENERAL 1.1...

This preview shows document pages 1 - 2. Sign up to view the full document.

View Full Document Right Arrow Icon
Ask a homework question - tutors are online