Project Number
1
Section 07242
Heritage
May 2003
Polymer Based EIFS
SECTION
07242
POLYMER BASED EIFS
PART 1 GENERAL
1.1 SUMMARY
A.
Includes But Not Limited To
1.
Furnish and install drainage-type PB EIFS system as described in Contract Documents,
including sealants.
B.
Related Sections
1.
Section
09253
-
Gypsum Sheathing
1.2 REFERENCES
A.
American Society For Testing And Materials
1.
ASTM C 578-00, 'Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation'
1.3 SUBMITTALS
A.
Product Data
1.
Manufacturer's literature
2.
Maintenance, cleaning, and repair instructions
3.
Color selection
B.
Shop Drawings
-
Show EIFS Manufacturer's details and recommended sealant application.
C.
Samples
-
Field created sample of each color and texture to be used.
Make sample with same
tools and techniques to be used on Project.
D.
Quality Assurance / Control
-
Letter from EIFS Manufacturer certifying level of training and
experience of Installer.
1.4
QUALITY ASSURANCE
A.
Qualifications
-
Installer shall have performed at least three installations of similar size, scope,
and complexity in each of the past two years and be approved by EIFS Manufacturer.
B.
Regulatory Requirements
-
System shall be recognized for intended use by applicable building
codes.
This
preview
has intentionally blurred sections.
Sign up to view the full version.

This is the end of the preview.
Sign up
to
access the rest of the document.
- Winter '08
- Burr,K
- Thermal insulation, Firestop, Exterior Insulation Finishing System, EIFS Manufacturer, polymer based eifs
-
Click to edit the document details