07631

07631 - SECTION 07631 ROOF FLASHING Shingles PART 1 GENERAL...

Info iconThis preview shows pages 1–2. Sign up to view the full content.

View Full Document Right Arrow Icon
Project Number 1 Section 07631 Heritage May 2003 Roof Flashing - Shingles SECTION 07631 ROOF FLASHING / Shingles PART 1 GENERAL 1.1 SUMMARY A. Products Supplied But Not Installed Under This Section 1. Formed Valley Metal 2. Pipe flashing B. Related Sections 1. Section 07312 - Installation 2. Section 07920 - Quality of sealants 1.2 REFERENCES A. American Society For Testing And Materials 1. ASTM A 361-94, 'Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) by the Hot-Dip Process for Roofing and Siding' PART 2 PRODUCTS 2.1 MATERIALS A. Formed Valley Metal And Drip Edge 1. Metal - a. Aluminum - 0.032 inch thick minimum a. Steel - Minimum 24 ga, hot-dipped galvanized to meet requirements of ASTM A 361, 1.25 oz / sq ft. 2. Finishes - a. Face coating polyvinyledene Fluoride (PVF 2 ) Resin-base finish (Kynar 500 or Hylar 5000) for coil coating components containing 70 percent minimum PVF 2 in resin portion of formula. Thermo-cured two coat system consisting of corrosion inhibiting
Background image of page 1

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon
Image of page 2
This is the end of the preview. Sign up to access the rest of the document.

This note was uploaded on 01/11/2012 for the course CM 105 taught by Professor Burr,k during the Winter '08 term at BYU.

Page1 / 2

07631 - SECTION 07631 ROOF FLASHING Shingles PART 1 GENERAL...

This preview shows document pages 1 - 2. Sign up to view the full document.

View Full Document Right Arrow Icon
Ask a homework question - tutors are online