07634

07634 - SECTION 07634 METAL SOFFITS / Perforated PART 1...

Info iconThis preview shows pages 1–2. Sign up to view the full content.

View Full Document Right Arrow Icon
Project Number 1 Section 07634 Heritage May 2003 Metal Soffits - Perforated SECTION 07634 METAL SOFFITS / Perforated PART 1 GENERAL 1.1 SUMMARY A. Includes But Not Limited To 1. Furnish and install metal soffit on Storage Building as described in Contract Documents. 1.2 SYSTEM DESCRIPTION A. Performance Requirements 1. Installed soffit system shall meet minimum required structural loading conditions when tested in accordance with Test Method No. 4 of AAMA Specification 1402-86. 2. Face finish shall meet performance requirements of Test Method No. 6 of AAMA Specification 1402.-86. Reverse side coating shall pass requirements of paragraphs 1.1 through 1.4 of Test Method No. 6. 1.3 WARRANTY A. Manufacturer's written 20 year guarantee for finish. PART 2 PRODUCTS 2.1 COMPONENTS A. Aluminum Soffit 1. Panels - a. 0.019 inch thick minimum. b. 'V' groove design complete with matching trim. c. Panels shall be interlocked full length of panel. d.
Background image of page 1

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon
Image of page 2
This is the end of the preview. Sign up to access the rest of the document.

This note was uploaded on 01/11/2012 for the course CM 105 taught by Professor Burr,k during the Winter '08 term at BYU.

Page1 / 2

07634 - SECTION 07634 METAL SOFFITS / Perforated PART 1...

This preview shows document pages 1 - 2. Sign up to view the full document.

View Full Document Right Arrow Icon
Ask a homework question - tutors are online