08521

08521 - SECTION 08521 ALUMINUM HUNG WINDOWS PART 1 GENERAL...

Info iconThis preview shows pages 1–2. Sign up to view the full content.

View Full Document Right Arrow Icon
Project Number 1 Section 08521 Heritage May 2003 Aluminum Hung Windows SECTION 08521 ALUMINUM HUNG WINDOWS PART 1 GENERAL 1.1 SUMMARY A. Includes But Not Limited To 1. Furnish and install single hung window units as described in Contract Documents. B. Related Sections 1. Section 07920 - Quality of sealant and backer rod 2. Section 08810 - Quality of glazing 1.2 REFERENCES A. American National Standards Institute / American Architectural Manufacturers Association 1. ANSI / AAMA 101-93, 'Aluminum Prime Windows and Sliding Glass Doors' B. American Architectural Manufacturers Association 1. AAMA 1503.1-88, 'Voluntary Test Method for Thermal Transmittance and Condensation Resistance of Windows, Doors, and Glazed Wall Sections' 1.3 SYSTEM DESCRIPTION A. Design Requirements 1. Comply with minimum test requirements of ANSI / AAMA 101 for classification of specified window in following - a. Air infiltration b. Water Resistance c. Uniform structural load 2. ANSI / AAMA 101 classification DH-C45 minimum for hung windows, tested at 4 feet wide by 7 feet high minimum. B. Performance Requirements 1. Meet following thermal performance - a. Condensation Resistance Factor (CRF) of 48 minimum when tested in accordance with AAMA 1503. b. Thermal Transmittance of 0.65 maximum when tested in accordance with AAMA 1503. 1.4 SUBMITTALS
Background image of page 1

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon
Image of page 2
This is the end of the preview. Sign up to access the rest of the document.

Page1 / 4

08521 - SECTION 08521 ALUMINUM HUNG WINDOWS PART 1 GENERAL...

This preview shows document pages 1 - 2. Sign up to view the full document.

View Full Document Right Arrow Icon
Ask a homework question - tutors are online