08711

08711 - 4. Approved Products-a. Interior -1) Hager - BB...

Info iconThis preview shows pages 1–2. Sign up to view the full content.

View Full Document Right Arrow Icon
Project Number 1 Section 08711 Heritage May 2003 Hanging Devices SECTION 08711 HANGING DEVICES PART 1 GENERAL 1.1 SUMMARY A. Products Supplied But Not Installed Under This Section 1. Hinges for flush wood and hollow metal doors B. Related Sections 1. Section 08701 - General Hardware Requirements PART 2 PRODUCTS 2.1 MANUFACTURED UNITS A. Hinges 1. For 1-3 / 4 inch doors in metal frames - a. Standard - 4-1 / 2 inches by 4-1 / 2 inches. b. Wide Throw - 4-1/2 inches by width required 2. Use non-removable pins on exterior opening doors. 3. Hinges on exterior doors shall be solid brass, plated to achieve specified finish.
Background image of page 1

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon
Background image of page 2
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: 4. Approved Products-a. Interior -1) Hager - BB 1279 2) McKinney - TA 2714 3) Stanley - FBB 179 b. Exterior -1) Hager - BB 1191 2) McKinney - TA 2314 3) Stanley - FBB 191 2.2 MANUFACTURERS A. Hager Companies, St Louis, MO (800) 255-3590 or (314) 772-4400 www.hagerhinge.com B. McKinney, Scranton, PA (800) 346-7707 or (717) 346-7551 www.mckinneyhinge.com C. Stanley, New Britain, CT (800) 337-4393 or (860) 255-5111 www.stanleyworks.com PART 3 EXECUTION- Not Used END OF SECTION...
View Full Document

This note was uploaded on 01/11/2012 for the course CM 105 taught by Professor Burr,k during the Winter '08 term at BYU.

Page1 / 2

08711 - 4. Approved Products-a. Interior -1) Hager - BB...

This preview shows document pages 1 - 2. Sign up to view the full document.

View Full Document Right Arrow Icon
Ask a homework question - tutors are online