08715

08715 - 5. Approved Products-a. 7900 Series by Dorma b....

Info iconThis preview shows pages 1–2. Sign up to view the full content.

View Full Document Right Arrow Icon
Project Number 1 Section 08715 Heritage May 2003 Closing Devices SECTION 08715 CLOSING DEVICES PART 1 GENERAL 1.1 SUMMARY A. Products Supplied But Not Installed Under This Section 1. Closers for flush wood doors and hollow metal doors. B. Related Sections 1. Section 08701 - General Hardware Requirements 1.2 WARRANTY A. Provide Manufacturer's standard warranty, 5 years minimum. PART 2 PRODUCTS 2.1 MANUFACTURED UNITS A. Surface-Mounted Overhead Door Closers 1. Closers provided under this Section shall be from same Manufacturer. 2. Provide parallel arms on closers unless door position in relation to adjacent wall requires otherwise. Provide covers. 3. Closers shall allow for 180 degree opening and not be used as a stop. 4. Closers shall have following features - a. Adjustable sweep speed b. Adjustable backcheck c. Non-handed, non-sized d. Delayed action closing where noted on Door Schedule
Background image of page 1

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon
Background image of page 2
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: 5. Approved Products-a. 7900 Series by Dorma b. 1461 Series by LCN c. 8501 Series by Norton d. 1431 Series by Sargent 2.2 MANUFACTURERS A. Dorma, Reamstown, PA (800) 523-8483 or (717) 336-3881 www.dorma-usa.com B. LCN, Princeton, IL (800) 526-2400 or (815) 875-3311 www.lcnclosers.com C. Norton, Charlotte, NC (800) 438-1951 or (704) 283-2101 www.yalesecurity.com D. Sargent, New Haven, CT (800) 906-6606 or (203) 562-2151 www.sargentlock.com PART 3 EXECUTION 3.1 INSTALLATION A. Mount closers on stop side of door wherever conditions permit. B. Through-bolt hardware-to-door connections. Project Number 2 Section 08715 Heritage May 2003 Closing Devices 3.2 ADJUSTING A. Adjust closers to provide maximum opening force as required by governing code authority and proper backcheck and sweep speed. END OF SECTION...
View Full Document

This note was uploaded on 01/11/2012 for the course CM 105 taught by Professor Burr,k during the Winter '08 term at BYU.

Page1 / 2

08715 - 5. Approved Products-a. 7900 Series by Dorma b....

This preview shows document pages 1 - 2. Sign up to view the full document.

View Full Document Right Arrow Icon
Ask a homework question - tutors are online