08716

08716 - - 40 inches high by width of door less 3 / 4 inch...

Info iconThis preview shows pages 1–2. Sign up to view the full content.

View Full Document Right Arrow Icon
Project Number 1 Section 08716 - Heritage May 2003 Protective Plates And Trim SECTION 08716 PROTECTIVE PLATES AND TRIM PART 1 GENERAL 1.1 SUMMARY A. Products Supplied But Not Installed Under This Section 1. Kick plates B. Related Sections 1. Section 08701 - General Hardware Requirements and VMR Suppliers PART 2 PRODUCTS 2.1 MANUFACTURED UNITS A. Material - 0.050 inch thick Stainless Steel B. Sizes 1. Kick Plates - 10 inches high by width of door less 3 / 4 inch on each side. 2. Armor Plates
Background image of page 1

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon
Background image of page 2
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: - 40 inches high by width of door less 3 / 4 inch on each side. 2.2 APPROVED MANUFACTURERS A. Glynn-Johnson, Indianapolis, IN (800) 525-0336 or (317) 899-9440 B. Hager, St Louis, MO (800) 255-3590 or (314) 772-4400 www.hagerhinge.com C. Ives, Wallingford, CT (800) 654-2708 or (203) 294-4837 D. Rockwood Manufacturing Co, Rockwood, PA (800) 458-2424 or (814) 926-2026 www.rockwoodmfg.com PART 3 EXECUTION- Not Used END OF SECTION...
View Full Document

This note was uploaded on 01/11/2012 for the course CM 105 taught by Professor Burr,k during the Winter '08 term at BYU.

Page1 / 2

08716 - - 40 inches high by width of door less 3 / 4 inch...

This preview shows document pages 1 - 2. Sign up to view the full document.

View Full Document Right Arrow Icon
Ask a homework question - tutors are online