09651

09651 - SECTION 09651 RESILIENT BASE AND ACCESSORIES PART 1 GENERAL 1.1 SUMMARY A Includes But Not Limited To 1 Furnish and install rubber base as

Info iconThis preview shows pages 1–2. Sign up to view the full content.

View Full Document Right Arrow Icon
Project Number 1 Section 09651 Heritage May 2003 Resilient Base And Accessories SECTION 09651 RESILIENT BASE AND ACCESSORIES PART 1 GENERAL 1.1 SUMMARY A. Includes But Not Limited To 1. Furnish and install rubber base as described in Contract Documents. 1.2 REFERENCES A. American Society for Testing and Materials 1. ASTM F 1861-00, ‘Standard Specification for Resilient Wall Base’ 1.3 SUBMITTALS A. Product Data 1. Manufacturer's literature or cut sheet on base and adhesive. 2. Color selection 1.4 PROJECT CONDITIONS A. Project Environmental Requirements 1. Store materials at not less than 70 deg F for at least 24 hours before using. 2. Do not apply in temperatures below 70 deg F. PART 2 PRODUCTS 2.1 MATERIAL A. Base 1. Molded or extruded meeting requirements of ASTM F 1861, Type TP or Type TS - a. Virgin synthetic rubber, free from objectionable odors, blisters, cracks, and other defects affecting appearance or serviceability of rubber, and not containing fabric. b.
Background image of page 1

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon
Image of page 2
This is the end of the preview. Sign up to access the rest of the document.

This note was uploaded on 01/11/2012 for the course CM 105 taught by Professor Burr,k during the Winter '08 term at BYU.

Page1 / 2

09651 - SECTION 09651 RESILIENT BASE AND ACCESSORIES PART 1 GENERAL 1.1 SUMMARY A Includes But Not Limited To 1 Furnish and install rubber base as

This preview shows document pages 1 - 2. Sign up to view the full document.

View Full Document Right Arrow Icon
Ask a homework question - tutors are online