09726

09726 - SECTION 09726 SISAL WALL COVERING PART 1 GENERAL 1.1 SUMMARY A Includes But Not Limited To 1 Furnishing and installing wall covering'Type A

Info iconThis preview shows pages 1–2. Sign up to view the full content.

View Full Document Right Arrow Icon
Project Number 1 Section 09726 Heritage May 2003 Sisal Wall Covering SECTION 09726 SISAL WALL COVERING PART 1 GENERAL 1.1 SUMMARY A. Includes But Not Limited To 1. Furnishing and installing wall covering 'Type A' as described in Contract Documents. B. Related Sections 1. Section 06452 - Wood trim for sisal wall covering 2. Section 09923 - Priming of gypsum board 1.2 SUBMITTALS A. Product Data 1. Manufacturer's literature or cut sheet 2. Maintenance instructions 3. Color and pattern selection B. Quality Assurance / Control - Copies of flame spread certification and ‘Room-Corner Test’ 1.3 QUALITY ASSURANCE A. Regulatory Requirements 1. Wall covering shall have Class A flame spread rating. 2. Passage of UBC 8-2 ‘Room-Corner Test’ is required for system. Adhesive cited in test literature is required for installation of wall covering on Project. PART 2 PRODUCTS 2.1 MATERIALS A. Sisal Wall Covering 1. 100 percent fire-treated sisal yarn 2. 11 / 64 inch pile height, 48 oz / sq yd minimum. Sisal to be installed full height on walls shall
Background image of page 1

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon
Image of page 2
This is the end of the preview. Sign up to access the rest of the document.

This note was uploaded on 01/11/2012 for the course CM 105 taught by Professor Burr,k during the Winter '08 term at BYU.

Page1 / 2

09726 - SECTION 09726 SISAL WALL COVERING PART 1 GENERAL 1.1 SUMMARY A Includes But Not Limited To 1 Furnishing and installing wall covering'Type A

This preview shows document pages 1 - 2. Sign up to view the full document.

View Full Document Right Arrow Icon
Ask a homework question - tutors are online