15150

15150 - SECTION 15150 SANITARY WASTE AND VENT PIPING PART 1...

Info iconThis preview shows pages 1–2. Sign up to view the full content.

View Full Document Right Arrow Icon
1 Section 15150 Project Name Project Date Sanitary Waste And Vent Piping Systems SECTION 15150 SANITARY WASTE AND VENT PIPING PART 1 GENERAL 1.1 SUMMARY A. Includes But Not Limited To 1. Furnish and install soil, waste, and vent piping systems within building and connect with outside utility lines 5 feet 1 500 mm out from building where applicable. 2. Perform excavation and backfill required by work of this Section. B. Related Sections 1. Section 02315 - Criteria for performance of excavation and backfill 2. Section 02535 - Sewage piping from 5 feet 1 500 mm out from building to main On Addition / Renovation work where no new roofing is being provided, it should be specified that this Section furnish and install the necessary roof jacks and flashing. 3. Sections Under 07300 Heading - Furnishing and installing of roof jacks and pipe flashing at roof 4. Section 07840 - Quality of firestopping material 3. Section 15101 - General Piping Requirements 1.2 REFERENCES Delete or add references based on editing of other parts of this Section and the type of piping selected. A. American Society For Testing And Materials 1. ASTM A 74-98, 'Standard Specification for Cast Iron Soil Pipe and Fittings' 2. ASTM C 564-97, 'Standard Specification for Rubber Gaskets for Cast Iron Soil Pipe and Fittings' 3. ASTM D 2235-96a, ‘Standard Specification for Solvent Cement for ABS Plastic Pipe and Fittings’ 4. ASTM D 2321-00, ‘Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications’ 5. ASTM D 2564-96a, ‘Standard Specification for Solvent Cements for Poly (Vinyl Chloride)(PVC) Plastic Piping Systems’ 6. ASTM D 3034-00, ‘Standard Specification for Type PSM Poly Vinyl Chloride)(PVC) Sewer Pipe and Fittings’ 7. ASTM F 628-00, ‘Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings with a Cellular Core’ 8. ASTM F 656-96a, ‘Standard Specification for Primers for Use in Solvent Cement Joints of Poly (Vinyl Chloride)(PVC) Plastic Pipe and Fittings’ 9. ASTM F 789-95a, ‘Standard Specification for Type PSM Poly (Vinyl Chloride)(PVC) Plastic Gravity Flow Sewer Pipe and Fittings’ 10. ASTM F 891-00, ‘Standard Specification for Coextruded Poly (Vinyl Chloride)(PVC) Plastic Drain, Waste, and Vent Pipe Fittings with a Cellular Core’ Delete Article ‘1.3' if no sewer piping is to be installed under new building slabs in new buildings or new additions. 1.3 QUALITY ASSURANCE A. Pre-Installation Conference - Participate in pre-installation conference specified in Section 03313. PART 2 PRODUCTS
Background image of page 1

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon
Image of page 2
This is the end of the preview. Sign up to access the rest of the document.

This note was uploaded on 01/11/2012 for the course CM 105 taught by Professor Burr,k during the Winter '08 term at BYU.

Page1 / 4

15150 - SECTION 15150 SANITARY WASTE AND VENT PIPING PART 1...

This preview shows document pages 1 - 2. Sign up to view the full document.

View Full Document Right Arrow Icon
Ask a homework question - tutors are online