15854

15854 - SECTION 15854 LOUVERS AND VENTS PART 1 GENERAL 1.1...

Info iconThis preview shows pages 1–2. Sign up to view the full content.

View Full Document Right Arrow Icon
Project Number 1 Section 15854 Project Name Project Date Louvers And Vents SECTION 15854 LOUVERS AND VENTS PART 1 GENERAL 1.1 SUMMARY A. Includes But Not Limited To 1. Furnish and install louvers connected to ductwork as described in Contract Documents. Delete Paragraph ‘B’ if no architectural louvers necessary. B. Products Supplied But Not Installed Under This Section 1. Architectural louvers not connected to ductwork. C. Related Sections Delete paragraph ‘1' if no architectural louvers necessary. 1. Section 06201 - Installation of architectural louvers not connected to ductwork 2. Section 15801 - General Duct Requirements PART 2 PRODUCTS 2.1 MANUFACTURED UNITS A. Louvers 1. General - a. Extruded aluminum, with blades welded or screwed into frames b. Frames shall have mitered corners. c. Louvers shall be recessed, flanged, stationary, or removable as noted on Drawings. d. Finish - 1) Polyvinyledene Fluoride (PVF 2 ) Resin-base finish (Kynar 500 or Hylar 5000) containing 70 percent minimum PVF
Background image of page 1

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon
Image of page 2
This is the end of the preview. Sign up to access the rest of the document.

This note was uploaded on 01/11/2012 for the course CM 105 taught by Professor Burr,k during the Winter '08 term at BYU.

Page1 / 2

15854 - SECTION 15854 LOUVERS AND VENTS PART 1 GENERAL 1.1...

This preview shows document pages 1 - 2. Sign up to view the full document.

View Full Document Right Arrow Icon
Ask a homework question - tutors are online