15861

15861 - Delete Paragraph ‘B’ if no downflow furnaces...

Info iconThis preview shows pages 1–2. Sign up to view the full content.

View Full Document Right Arrow Icon
Project Number 1 Section 15861 Project Name Project Date Air Filters SECTION 15861 AIR FILTERS PART 1 GENERAL 1.1 SUMMARY A. Includes But Not Limited To 1. Furnish and install filters used in mechanical equipment. B. Related Sections 1. Section 15801 - General Duct Requirements PART 2 PRODUCTS 2.1 MANUFACTURED UNITS A. Furnace Filters - One inch 25 mm thick throw-away type as recommended by Furnace Manufacturer. PART 3 EXECUTION 3.1 INSTALLATION A. Provide ample access for filter removal.
Background image of page 1

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon
Background image of page 2
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: Delete Paragraph ‘B’ if no downflow furnaces used. B. Downflow furnaces shall have filters installed in the ductwork above the furnace inlet with filter rack and hinged access door. Do not use hammock filters on this type of furnace. 3.2 FIELD QUALITY CONTROL A. Inspection - At date of Substantial Completion, air filters shall be new, clean, and approved by Owner's representative. END OF SECTION...
View Full Document

This note was uploaded on 01/11/2012 for the course CM 105 taught by Professor Burr,k during the Winter '08 term at BYU.

Page1 / 2

15861 - Delete Paragraph ‘B’ if no downflow furnaces...

This preview shows document pages 1 - 2. Sign up to view the full document.

View Full Document Right Arrow Icon
Ask a homework question - tutors are online