16532CM

16532CM - UFO-5 by Dual-Lite Inc Cheshire CT(203 699-3000...

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
SECTION 16532 EMERGENCY BATTERY UNITS PART 1 GENERAL 1.1 SUMMARY A. Includes But Not Limited To 1. Furnish and install fluorescent emergency lighting packs as described in Contract Documents. B. Related Sections 1. Section 16051 - General Electrical Requirements PART 2 PRODUCTS 2.1 EQUIPMENT A. Lighting Packs 1. Shall operate one lamp at approximately 600 lumens initially and not less than 450 lumens after 90 minutes. 2. Battery shall be long life nickel cadmium type. Charger shall be capable of full recharge in 24 hours. 3. Unit shall be complete with charging indicator light and test switch. 4. Acceptable Products - a. B70A by Bodine Co Inc, Collierville, TN (800) 223-5728 or (901) 853-7211 www.bodine.com b. CFP841 by Chloride Systems, Burgaw, NC (910) 259-1000 www.chloridesys.com c.
Background image of page 1
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: UFO-5 by Dual-Lite Inc, Cheshire, CT (203) 699-3000 www.dual-lite.com d. I-48 by Iota Engineering Co, Tucson, AZ (520) 294-3292 www.iotaengineering.com e. PS600C by Lithonia Lighting, Conyers, GA (770) 922-9000 www.lithonia.com f. Equal as approved by Architect before bidding. See Section 01600. PART 3 EXECUTION 3.1 INSTALLATION A. Install fluorescent emergency lighting pack in ballast channel with charging indicator light and test switch mounted on fixture end, or visible and accessible through lens. B. Wire so unit can be tested with lights on. C. Wire so lamps in normal mode are switched off with other lighting in area. Connect emergency lighting unit to unswitched conductor of normal lighting circuit. END OF SECTION...
View Full Document

This note was uploaded on 01/11/2012 for the course CM 105 taught by Professor Burr,k during the Winter '08 term at BYU.

Ask a homework question - tutors are online