SSAC2011_Lecture11

SSAC2011_Lecture11 - Chalmers University of Technology...

Info iconThis preview shows pages 1–5. Sign up to view the full content.

View Full Document Right Arrow Icon

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: Chalmers University of Technology Contents Lecture 1 Introduction to the course General introduction to ship structures and loads. Introduction. The anatomy of the ship: structural functions of elements. The hull girder. Primary strength elements. Secondary strength elements. Bottom structures. Deck structures. Department of Shipping and Marine Technology Division of Ship Design Ship Structures Advanced Course 2011, p. 1 Professor Jonas Ringsberg LECTURE 1 Side structures. Transverse bulkheads. Fore ship and stern. Details. Different types of loads that act on the ship. Chalmers University of Technology The anatomy of the ship Beam theory MSE 2011 Global structural effects Local structural (bending and twisting) Classification rules (FE analysis) Plate theory and ff ti b dth SSAC 2011 Department of Shipping and Marine Technology Division of Ship Design Ship Structures Advanced Course 2011, p. 2 Professor Jonas Ringsberg LECTURE 1 effects effective breadth of stiffened plating Buckling FE analysis Chalmers University of Technology The anatomy of the ship Stiffened plate effective breadth Department of Shipping and Marine Technology Division of Ship Design Ship Structures Advanced Course 2011, p. 3 Professor Jonas Ringsberg LECTURE 1 Chalmers University of Technology The purpose of stiffeners is to prevent the plate areas of a ship The anatomy of the ship Secondary strength elements stiffeners The purpose of stiffeners is to prevent the plate areas of a ship from distorting under the influence of the shearing loads, bending moments, and local loads. Department of Shipping and Marine Technology Division of Ship Design Ship Structures Advanced Course 2011, p. 4 Professor Jonas Ringsberg LECTURE 1 Chalmers University of Technology Contents Lecture 2 Ultimate strength of ships and offshore structures ISSC: International Ships and Offshore Structures Congress. The lecture material is based on the contents of the ISSC 2009 Ultimate Strength (III.1) committee report. The transparencies have been approved by the committee chairman to be used as teaching material in the SSAC course at Chalmers. Courtesy of Professor Jeom Kee Paik: chairman of the ISSC 2009 III.1 committee. Department of Shipping and Marine Technology Division of Ship Design Ship Structures Advanced Course 2011, p. 5 Professor Jonas Ringsberg LECTURE 2 Chalmers University of Technology Causes of structural failures Department of Shipping and Marine Technology Division of Ship Design Ship Structures Advanced Course 2011, p. 6 Professor Jonas Ringsberg LECTURE 2 Chalmers University of Technology Keywords in todays maritime industry HSE HSE Health, Safety, and the Environment Health, Safety, and the Environment IACS CSR Advanced Technologies IMO GBS ISO ISO 18072 Department of Shipping and Marine Technology Division of Ship Design Ship Structures Advanced Course 2011, p. 7Ship Structures Advanced Course 2011, p....
View Full Document

Page1 / 27

SSAC2011_Lecture11 - Chalmers University of Technology...

This preview shows document pages 1 - 5. Sign up to view the full document.

View Full Document Right Arrow Icon
Ask a homework question - tutors are online