Thermodynamics HW Solutions 361

Thermodynamics HW Solutions 361 - Chapter 4 Transient Heat...

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: Chapter 4 Transient Heat Conduction 4-82 A cubic block and a cylindrical block are exposed to hot gases on all of their surfaces. The center temperatures of each geometry in 10, 20, and 60 min are to be determined. Assumptions 1 Heat conduction in the cubic block is three-dimensional, and thus the temperature varies in all x-, y , and z- directions. 2 Heat conduction in the cylindrical block is two-dimensional, and thus the temperature varies in both axial x- and radial r- directions. 3 The thermal properties of the granite are constant. 4 The heat transfer coefficient is constant and uniform over the entire surface. 5 The Fourier number is > 0.2 so that the one-term approximate solutions (or the transient temperature charts) are applicable (this assumption will be verified). Properties The thermal properties of the granite are k = 2.5 W/m. C and = 1.15 10-6 m 2 /s. Analysis : Cubic block: This cubic block can physically be formed by the intersection of three infinite plane wall of...
View Full Document

This note was uploaded on 01/19/2012 for the course PHY 4803 taught by Professor Dr.danielarenas during the Fall '10 term at UNF.

Ask a homework question - tutors are online