# Hw1 - cuit • Draw a phasor diagram that shows the current through each of the components in the cir-cuit 4 Use Matlab to show that 3 sinusoids

This preview shows page 1. Sign up to view the full content.

Page 1 of 1 EECE 253 - Homework rd Ed. Solve the following problems: 1) In problem 6.46, the current source is an AC source with a value A. 2) In problem 6.47, the current source is an AC source with a value A and R is 2 ohms. 3) In problem 6.48, the current source is an AC source with a value mA. For each of the circuits described by 1) through 3) the sources operate at a frequency of ω = 1 rad/s. Plot the impedance of each component on the complex plane. Plot the admittance of each component on the complex plane. Draw a phasor diagram that shows the voltage across each of the components in the cir-
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: cuit. • Draw a phasor diagram that shows the current through each of the components in the cir-cuit. 4) Use Matlab to show that 3 sinusoids that are equal in magnitude but out of phase sum to 0. 5) Chapter 3 - Problems • 3.65 • Use Matlab to solve for voltage v 2 in Problem 3.69 • Use Matlab to solve for the voltage across the resistor in Problem 3.73. Check your answer using CircuitMaker. 6) Chapter 4 - Problems • Use Matlab to solve Problem 4.23. Check your answer using CircuitMaker. 5 0 ∠ 5 0 ∠ 5 0 ∠ 120 ° 3 Ω...
View Full Document

## This note was uploaded on 01/19/2012 for the course EECE 253 taught by Professor Shuo,tang during the Spring '11 term at The University of British Columbia.

Ask a homework question - tutors are online