Chapter 5 Numerical Methods in Heat Conduction 5-55 Heat transfer through a square chimney is considered. The nodal temperatures and the rate of heat loss per unit length are to be determined with the finite difference method. Assumptions 1 Heat transfer is given to be steady and two-dimensional since the height of the chimney is large relative to its cross-section, and thus heat conduction through the chimney in the axial direction is negligible. It is tempting to simplify the problem further by considering heat transfer in each wall to be one dimensional which would be the case if the walls were thin and thus the corner effects were negligible. This assumption cannot be justified in this case since the walls are very thick and the corner sections constitute a considerable portion of the chimney structure. 2 There is no heat generation in the chimney. 3 Thermal conductivity is constant. Properties
This is the end of the preview. Sign up
access the rest of the document.
This note was uploaded on 01/22/2012 for the course PHY 4803 taught by Professor Dr.danielarenas during the Fall '10 term at UNF.