Chapter 10 Boiling and Condensation10-51 Saturated steam at a saturation temperature of Tsat= 100°C condenses on a plate which is tilted 40°from the vertical and maintained at 80°C by circulating cooling water through the other side. The rate of heat transfer to the plate and the rate of condensation of the steam are to be determined.Assumptions1Steady operating conditions exist.2The plate is isothermal. 3 The condensate flow is wavy-laminar over the entire plate (this assumption will be verified). 4 The density of vapor is much smaller than the density of liquid, ρvl<<. PropertiesThe properties of water at the saturation temperature of 100°C are hfg= 2257×103J/kg and ρv= 0.60 kg/m3. The properties of liquid water at the film temperature of TTTfs=+=()/sat2(100 + 80)/2 = 90°C are (Table A-9), μνμlllllpllk==×⋅==×=⋅°°−−96530315 100 326 1042060675336../..kg / mkg / m sm/sC J/kgCW/m C22 mInclined plate 80°C Condensate 40°Vapor 100°C Analysis
This is the end of the preview. Sign up
access the rest of the document.
This note was uploaded on 01/24/2012 for the course PHY 4803 taught by Professor Dr.danielarenas during the Fall '10 term at UNF.