Experiment 8

Experiment 8 - PURPOSE: To characterize an npn bipolar...

Info iconThis preview shows pages 1–2. Sign up to view the full content.

View Full Document Right Arrow Icon
To characterize an npn bipolar transistor and measure the dc operating point and the ac performance of a single-transistor amplifier. PROCEDURE: 1. Assemble circuit in Fig1. Use pot to very voltage from 0 to 10 V 2. Assemble circuit in Fig 2, first without capacitor a. Now disconnect and apply 0.2 Vpp sine @ l kHz b. Now connect the 10 µF at point E and apply 0.1 Vpp sine @ 1 kHz signal c. Apply 100 Hz square wave (0.1 Vpp) to input RESULTS: Part 1: IN V B V (V) C V (V) k V V I C IN b 100 - = (A) C C CC C R V V I - = (A) B C I I = β 10.00 0.737 .180 9.263E-05 0.00982 106.0132 9.64 0.735 .184 8.905E-05 0.00982 110.2302 8.62 0.734 .1982 7.886E-05 0.00980 124.2937 7.56 0.733 .225 6.827E-05 0.00978 143.1815 6.42 0.7306 .390 5.689E-05 0.00961 168.9106 5.416 0.7227 1.791 4.693E-05 0.00821 174.9089 4.62 0.7156 3.030 3.904E-05 0.00697 178.5165 3.85 0.7089 4.294 3.141E-05 0.00571 181.6561 2.694 0.694 6.299 0.00002 0.00370 185.0500 1.6861 0.6789 8.114 1.007E-05 0.00189 187.2519 0.6704 0.6072
Background image of page 1

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon
Image of page 2
This is the end of the preview. Sign up to access the rest of the document.

This note was uploaded on 01/25/2012 for the course EE 2231 taught by Professor Staff during the Spring '08 term at LSU.

Page1 / 6

Experiment 8 - PURPOSE: To characterize an npn bipolar...

This preview shows document pages 1 - 2. Sign up to view the full document.

View Full Document Right Arrow Icon
Ask a homework question - tutors are online