MIT2_00AJs09_lab03

MIT2_00AJs09_lab03 - MIT OpenCourseWare http:/ocw.mit.edu...

Info iconThis preview shows pages 1–4. Sign up to view the full content.

View Full Document Right Arrow Icon
MIT OpenCourseWare http://ocw.mit.edu 2.00AJ / 16.00AJ Exploring Sea, Space, & Earth: Fundamentals of Engineering Design Spring 2009 For information about citing these materials or our Terms of Use, visit: http://ocw.mit.edu/terms .
Background image of page 1

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon
2.00AJ/16.00AJ Lab 3: Sensor Suite Assembly Instructions Parts List: 1 x Circuit Board 1 x NE555N IC 1 x Basic Stamp 2sx 1 x TLC0831CP IC 1 x 9 Volt Battery 1 x UA741CN IC 1 x DB9 Female Connector 1 x 24 Pin DIP Connector 1 x Parallax MMSD 2 x 1.1MOhm Resistors 1 x 9 Volt Battery Connector 3 x 8 Pin DIP Connector 1 x 330 Ohm Resistor 3 x Right Angle 2 Pin Male 1 x 7805 5 Volt Voltage Molex KK Connector Regulator 3 x 0.1uf Capacitors 1 x LED 4 x Female Molex KK Housings 1 x Female SIP Connector 8 x Molex KK Pins 1 x 0.22uf Capacitor 1 x Temperature Probe 1 x 0.01uf Capacitor 1 x Pressure Sensor 1 x Right Angle 4 Pin Male 1 x Photocell Molex KK Connector 2 x Stainless Steel Screws 1 x Straight 2 Pin Male Molex KK Connector 1
Background image of page 2
Insert the resistors into the circuit board as depicted in image 1. Splay the resistor leads outwards once inserted to hold the component in place. Solder the leads on the back of the circuit board (image 2) and remove all excess material with a pair of wire nippers. Image 1 – Resistors in Place Image 2 – Soldering the Leads Step 2: Insert the capacitors into the board as shown in image 3. Note that the circuit board has the capacitor number printed above the mounting location for each component, and not all of the capacitors are the same. Image 3 – Capacitors in Place
Background image of page 3

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon
Image of page 4
This is the end of the preview. Sign up to access the rest of the document.

This note was uploaded on 01/28/2012 for the course AERO 2.0 taught by Professor Alexandratechet during the Spring '09 term at MIT.

Page1 / 7

MIT2_00AJs09_lab03 - MIT OpenCourseWare http:/ocw.mit.edu...

This preview shows document pages 1 - 4. Sign up to view the full document.

View Full Document Right Arrow Icon
Ask a homework question - tutors are online