m07_08_ps03_s04

m07_08_ps03_s04 - 1 m 1 m a) Determine the loading, shear...

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
Unified Engineering Spring 2004 Problem M7 and M8 (this is a two hour question) A simply supported aluminum alloy beam is 3 m long and has a cross-section which is an “I” cross-section 200 mm high and 100 mm wide. A uniform distributed load of 6 kN/m acts on the left hand two thirds of the beam. The Young’s modulus of the aluminum alloy is 70 GPa. The yield stress is 300 MPa. 6 kN/m 1 m
Background image of page 1
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: 1 m 1 m a) Determine the loading, shear force and bending moment as functions of the distance x measured from the left end of the beam. Draw the appropriate diagrams. b) Determine the maximum deflection(s) of the beam and its (their) location(s). c) Determine the magnitudes and locations of the maximum axial stress, s xx and the maximum shear stress, s xz. Will the aluminum alloy yield?...
View Full Document

This note was uploaded on 01/28/2012 for the course AERO 16.01 taught by Professor Markdrela during the Fall '05 term at MIT.

Ask a homework question - tutors are online