Packet Tracer - Implement a Small NetworkAddressing TableDeviceInterfaceAddressSubnet MaskDefault GatewayRTAG0/010.10.10.1255.255.255.0N/ARTAG0/110.10.20.1255.255.255.0N/ASW1VLAN110.10.10.2255.255.255.0blankSW2VLAN110.10.20.2255.255.255.0blankPC-1NIC10.10.10.2255.255.255.0blankPC-2NIC10.10.20.2255.255.255.0blankDeviceInterfaceAddressSubnet MaskDefault GatewayRTAG0/010.10.10.1255.255.255.0N/AG0/110.10.20.1255.255.255.0N/ASW1VLAN110.10.10.2255.255.255.010.10.10.1SW2VLAN110.10.20.2255.255.255.010.10.20.1PC-1NIC10.10.10.10255.255.255.010.10.10.1PC-2NIC10.10.20.10255.255.255.010.10.20.1ObjectivesPart 1: Create the Network TopologyPart 2: Configure Devices and Verify ConnectivityInstructionsPart 1: Create the Network TopologyStep 1: Obtain the required devices.a.Click theNetwork Devicesicon in the bottom tool bar.b.Click the router icon in the submenu.c.Locate the1941router icon. Click and drag the icon for the 1941 router into the topology area.d.Click the switch entry in the submenu.e.Locate the2960switch icon. Click and drag the icon for the 2960 switch into the topology area.f.Repeat the step above so that there aretwo2960 switches in the topology area.
