E3631-90002

E3631-90002 - y lppuS rewoP CD tuptuO elpirT A1363E tneligA...

Info iconThis preview shows pages 1–5. Sign up to view the full content.

View Full Document Right Arrow Icon
User’s Guide Part Number: E3631-90002 October 2007. For Safety information, Warranties, and Regulatory information, see the pages behind the Index. © Copyright Agilent Technologies, Inc. 2000-2007 All Rights Reserved. Agilent E3631A Triple Output DC Power Supply
Background image of page 1

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon
The Agilent E3631A is a high performance 80 watt-triple output DC power supply with GPIB and RS-232 interfaces. The combination of bench-top and system features in this power supply provides versatile solutions for your design and test requirements. Convenient bench-top features Triple output Easy-to-use knob control for voltage and current settings Highly visible vacuum-fluorescent display for voltage and current meters Tracking operation for ± 25V outputs Excellent load and line regulation and low ripple and noise Operating states storage Portable, ruggedized case with non-skid feet Flexible system features GPIB (IEEE-488) and RS-232 interfaces are standard SCPI (Standard Commands for Programmable Instruments) compatibility I/O setup easily done from front-panel Agilent E3631A Triple Output DC Power Supply
Background image of page 2
2 The Front Panel at a Glance 1 Meter and adjust selection keys 2 Tracking enable/disable key 3 Display limit key 4 Recall operating state key 5 Store operating state/Local key 6 Error/Calibrate key 7 I/O Configuration / Secure key 8 Output On/Off key 9 Control knob 10 Resolution selection keys 11 Voltage/current adjust selection key
Background image of page 3

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon
3 1 Meter and adjust selection keys Select the output voltage and current of any one supply (+6V, +25V, or -25V output) to be monitored on the display and allow knob adjustment of that supply. 2 Tracking enable / disable key Enables / disables the track mode of ± 25V supplies. 3 Display limit key Shows the voltage and current limit values on the display and allows knob adjustment for setting limit values. 4 Recall operating state key Recalls a previously stored operating state from location “1”, “2”, or “3”. 5 Store operating state / Local key 1 Stores an operating state in location “1”, “2”, or “3” / or returns the power supply to local mode from remote interface mode. 6 Error / Calibrate key 2 Displays error codes generated during operations, self-test and calibration / or enables calibration mode (the power supply must be unsecured before performing calibration). 7 I/O Configuration / Secure key 3 Configures the power supply for remote interfaces / or secure and unsecure the power supply for calibration. 8 Output On/Off key Enables or disables all three power supply outputs. This key toggles between two states. 9 Control knob Increases or decreases the value of the blinking digit by turning clockwise or counter clockwise. 10 Resolution selection keys
Background image of page 4
Image of page 5
This is the end of the preview. Sign up to access the rest of the document.

Page1 / 168

E3631-90002 - y lppuS rewoP CD tuptuO elpirT A1363E tneligA...

This preview shows document pages 1 - 5. Sign up to view the full document.

View Full Document Right Arrow Icon
Ask a homework question - tutors are online