A 106 _ A 106M _ 04 ;QTEWNI9BMTA2TQ__

A 106 _ A 106M _ 04 ;QTEWNI9BMTA2TQ__ - Used in USDOE-NE...

Info iconThis preview shows pages 1–2. Sign up to view the full content.

View Full Document Right Arrow Icon
Designation: A 106/A 106M – 04 Used in USDOE-NE standards Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service 1 This standard is issued under the fixed designation A 106/A 106M; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon ( e ) indicates an editorial change since the last revision or reapproval. This standard has been approved for use by agencies of the Department of Defense. 1. Scope* 1.1 This specification 2 covers seamless carbon steel pipe for high-temperature service (Note 1) in NPS 1 / 8 to NPS 48 [DN 6 to DN 1200] inclusive, with nominal (average) wall thickness as given in ASME B 36.10M. It shall be permissible to furnish pipe having other dimensions provided such pipe complies with all other requirements of this specification. Pipe ordered under this specification shall be suitable for bending, flanging, and similar forming operations, and for welding. When the steel is to be welded, it is presupposed that a welding procedure suitable to the grade of steel and intended use or service will be utilized. N OTE 1—It is suggested, consideration be given to possible graphitiza- tion. N OTE 2—The dimensionless designator NPS (nominal pipe size) [DN (diameter nominal)] has been substituted in this standard for such traditional terms as “nominal diameter,” “size,” and “nominal size.” 1.2 Supplementary requirements (S1 to S7) of an optional nature are provided for seamless pipe intended for use in applications where a superior grade of pipe is required. These supplementary requirements call for additional tests to be made and when desired shall be so stated in the order. 1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents. Therefore, each system is to be used independently of the other. 1.4 The following precautionary caveat pertains only to the test method portion, Sections 11, 12, 13, 14, and 15, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appro- priate safety and health practices and determine the applica- bility of regulatory limitations prior to use. 2. Referenced Documents 2.1 ASTM Standards: 3 A 530/A 530M Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe E 213 Practice for Ultrasonic Examination of Metal Pipe and Tubing E 309 Practice for Eddy-Current Examination of Steel Tu- bular Products Using Magnetic Saturation E 381 Method of Macroetch Testing Steel Bars, Billets, Blooms, and Forgings E 570 Practice for Flux Leakage Examination of Ferromag- netic Steel Tubular Products 2.2 ASME Standard: ASME B 36.10M Welded and Seamless Wrought Steel Pipe 4 2.3 Military Standards: MIL-STD-129 Marking for Shipment and Storage 5 MIL-STD-163
Background image of page 1

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon
Image of page 2
This is the end of the preview. Sign up to access the rest of the document.

This note was uploaded on 02/01/2012 for the course CIVL 2770 taught by Professor Fariborz during the Winter '11 term at Manitoba.

Page1 / 8

A 106 _ A 106M _ 04 ;QTEWNI9BMTA2TQ__ - Used in USDOE-NE...

This preview shows document pages 1 - 2. Sign up to view the full document.

View Full Document Right Arrow Icon
Ask a homework question - tutors are online