This preview shows page 1. Sign up to view the full content.
Unformatted text preview: • For the LANs, assign the first address to the router interface and the .10 address to the PCs. • Use cisco as the line passwords and class as the secret password. • Use 64000 as the clock rate. Task 3: Configure static and default routing • HQ should have exactly two static routes. • B1 and B2 should have one default route. Task 4: Test connectivity and examine the configuration. Step 1: Test connectivity. • You should now have end-to-end connectivity. Use ping to test connectivity across the network • Troubleshoot until pings are successful. Step 2: Examine the configuration. Use verification commands to make sure your configurations are complete. All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 1 of 1...
View Full Document
This note was uploaded on 02/01/2012 for the course ING 101 taught by Professor James during the Spring '11 term at Universidad del Cauca.
- Spring '11