Design Project

Design Project - Design Project Design matching network,...

Info iconThis preview shows pages 1–2. Sign up to view the full content.

View Full Document Right Arrow Icon
Design Project Design matching network, match load to source, nodal Q, design components  verify operation at operating frequency.  Draw circuit showing actual  components. Design Problem Your job is to design different matching networks for a 1.2 GHz RF amplifier with a Z  parameter matrix of: 26.9 14.7 4.5 2.8 469 240 99 127 j j Z j j - - = + - These parameters are provided by the manufacturer assuming the device is placed in a  50   system.  Meaning, the output terminal is terminated with a 50   impedance and  the input Z parameters were measured.  The input terminals were terminated with a 50   impedance and the output Z parameters were measured. If the amplifier is inserted into an RF system without a matching network, and connected  to a transmission line with Z o  = 50  : Determine input  Γ , SWR, % power reflected, % power transmitted and 
Background image of page 1

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon
Image of page 2
This is the end of the preview. Sign up to access the rest of the document.

Page1 / 2

Design Project - Design Project Design matching network,...

This preview shows document pages 1 - 2. Sign up to view the full document.

View Full Document Right Arrow Icon
Ask a homework question - tutors are online