# hw11 - and D(x,y,z)= Σ(1,2,3,5,7 by placing an X at each...

This preview shows page 1. Sign up to view the full content.

Electrical and Computer Engineering Department University of Maryland College Park, MD 20742-3285 Glenn L. Martin Institute of Technology d A. James Clark School of Engineering Dr. Charles B. Silio, Jr. Telephone 301-405-3668 Fax 301-314-9281 ENEE 244 Homework Set 11 (Due: Class 26, Thurs., Dec. 1, 2011) 1. Read Chapter 5, Sections 5-7 through 5-10 and Section 7.6.1 of Chapter 7 in Givone’s text. 2. Implement the following four functions A(x,y,z)= Σ(1,2,4,6), B(x,y,z)= Σ(0,1,6,7), C(x,y,z)= Σ(2,6),
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: and D(x,y,z)= Σ(1,2,3,5,7) by placing an X at each cross point where the fuse remains intact when implementing the four functions in the three input four output PLA shown below. y x z A B C D 3. Work problem 5.27. 4. Work problem 5.29. 5. Work problem 5.30. 6. Work problem 5.31 a.&c. 7. Work problem 5.32. 8. Work problem 7.11. 9. Work problem 7.15. 10. Work problem 7.17. 11. Work problem 7.18....
View Full Document

• Fall '11
• C.Silio
• University of Maryland, College Park, Computer Engineering Department, Work problem, A. James Clark School of Engineering, A. James Clark, Glenn L. Martin Institute of Technology

{[ snackBarMessage ]}

Ask a homework question - tutors are online