CXCD_LAN - and/or cavity/cartridge machining variations....

Info iconThis preview shows pages 1–2. Sign up to view the full content.

View Full Document Right Arrow Icon
Free flow side to nose check valve Capacity: 15 gpm (60 L/min.) Functional Group: Products : Cartridges : Check : 2-Port : Free Flow Side to Nose Model: CXCD-LAN Product Description Free-flow, side-to-nose check valves are on/off circuit components that allow free flow from the inlet (port 2) to the outlet (port 1) and block flow in the opposite direction. Technical Features Two-port check valves share the same cavity for a given frame size, however, pay close attention as flow paths may be in opposite directions. Will accept 5000 psi (350 bar) at ports 1 and 2. These check valves are considered circuit savers for existing circuits where manifold drillings are incorrect. The capacity of side-to-nose (port 2 to port 1) 2-port check valves is approximately 30% less than preferred models with a nose-to-side (port 1 to port 2) flow path. Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque
Background image of page 1

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon
Background image of page 2
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: and/or cavity/cartridge machining variations. Check valves offer extremely low leakage rates with a maximum leakage of less than 1 drop per minute (0,07 cc/min). Technical Data U.S. Units Metric Units Cavity T-13A Capacity 15 gpm 60 L/min. Maximum Operating Pressure 5000 psi 350 bar Maximum Valve Leakage at 110 SUS (24 cSt) 1 drops/min. 0,07 cc/min. Series (from Cavity) Series 1 Valve Hex Size 7/8 in. 22,2 mm Valve Installation Torque 30 - 35 lbf ft 40 - 50 Nm Seal Kits - Cartridge Buna: 990-010-007 Seal Kits - Cartridge Viton: 990-010-006 Model Weight 0.31 lb. 0.14 kg. Download CXCD-LAN $30.10 Recommended List Price Control Cracking Pressure Seal Material L Manual Override +8.00 A 4 psi (0,3 bar) +3.00 N Buna-N +0.00 When the modifier is /AP, the control must be X Copyright 2002-2011 Sun Hydraulics Corporation. All rights reserved. Terms and Conditions- ISO Certification- Statement of Privacy...
View Full Document

This note was uploaded on 02/07/2012 for the course ME 4232 taught by Professor Staff during the Fall '08 term at Minnesota.

Page1 / 2

CXCD_LAN - and/or cavity/cartridge machining variations....

This preview shows document pages 1 - 2. Sign up to view the full document.

View Full Document Right Arrow Icon
Ask a homework question - tutors are online