FSCD_XAN - Flow divider valve Functional Group: Products :...

Info iconThis preview shows pages 1–2. Sign up to view the full content.

View Full Document Right Arrow Icon
Flow divider valve Capacity: 1.5 - 8 gpm (6 - 30 L/min.) Functional Group: Products : Cartridges : Flow Divider : Divider : Divide Only Model: FSCD-XAN Product Description Flow dividers are sliding-spool, pressure-compensated devices used to split oil flow to two different branches of a circuit in a designated ratio. These valves are suitable for applications that use the following: unidirectional hydraulic motors, hydraulic cylinders where flow division in one direction only is required, and multiple circuits that are serviced from one pump supply. Technical Features All flow divider and divider/combiner cartridges are physically interchangeable (i.e. same flow path, same cavity for a given frame size). This valve is a divider only; any attempt to flow backwards through the valve is not advised. Operating characteristics cause the leg of the circuit with the greatest load to receive the higher percentage of flow in dividing mode. If a rigid mechanism is used to tie actuators together, the lead actuator may pull
Background image of page 1

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon
Image of page 2
This is the end of the preview. Sign up to access the rest of the document.

This note was uploaded on 02/07/2012 for the course ME 4232 taught by Professor Staff during the Fall '08 term at Minnesota.

Page1 / 3

FSCD_XAN - Flow divider valve Functional Group: Products :...

This preview shows document pages 1 - 2. Sign up to view the full document.

View Full Document Right Arrow Icon
Ask a homework question - tutors are online