Chapter 7 Assignment — WSU

Chapter 7 Assignment — WSU - Chapter 7...

Info iconThis preview shows pages 1–2. Sign up to view the full content.

View Full Document Right Arrow Icon
Chapter 7 Assignment Hands-On Assignment Perform the following on-vehicle tests. The required results are marked in red text. Digital Multi-Meter Voltage Reading Obtain a DMM. Obtain an automobile or truck with access to the battery. Place your meter on DC volts. 1. Measure the battery voltage. 2. Convert the meter's measurement into kilo-volts. Digital Multi-Meter Voltage Reading Obtain a DMM. Obtain an automobile or truck with access to the battery. Place your meter on DC volts 3. Measure the voltage from the battery negative post to a brake pipe connected to the master cylinder. 4. Convert the meter's measurement into base units. Digital Multi-Meter Voltage Reading Obtain a DMM. Obtain an automobile or truck with access to the battery and an under hood fuse block. Place your meter on DC volts 5. Measure the voltage from the battery positive post to the top of a fuse (if accessible). 6. Convert the meter's measurement intobase units. Digital Multi-Meter Resistance Reading Obtain a DMM. Place the DMM on Ohms and touch the meter leads with a finger on each hand.
Background image of page 1

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon
Background image of page 2
This is the end of the preview. Sign up to access the rest of the document.

This note was uploaded on 02/06/2012 for the course AUSV 1320 taught by Professor Johnkelly during the Winter '12 term at Weber.

Page1 / 2

Chapter 7 Assignment — WSU - Chapter 7...

This preview shows document pages 1 - 2. Sign up to view the full document.

View Full Document Right Arrow Icon
Ask a homework question - tutors are online