Chapter 12 Assignment — WSU

Chapter 12 Assignment — WSU - Chapter 12...

Info iconThis preview shows pages 1–2. Sign up to view the full content.

View Full Document Right Arrow Icon
Chapter 12 Assignment Hands-On Assignment Perform the following on-vehicle tests. The required results are marked in red text. E-mail the instructor if you have any questions or problems. (This assignment will cost about $7.00 at Radio Shack) Silicon Diode Testing Obtain a DMM. Select the diode test feature of the DMM. Obtain a silicon diode (Radio Shack part #: 276-1653). 1. Measure the silicon diode barrier voltage in the forward biased direction (anode to cathode). 2. Measure the silicon diodebarrier voltage in the reverse biased direction (cathode to anode). 3. Measure the silicon diode resistance in the forward biased direction(anode to cathode). 4. Measure the silicon diode resistance in the forward and reverse biased direction(cathode to anode). Light Emitting Diode Testing Obtain a DMM. Select the diode test feature of the DMM. Obtain a Light Emitting Diode (LED) (Radio Shackpart #: 276-1622) . Obtain a 470-ohm resistor (Radio Shackpart #: 276-115 ).
Background image of page 1

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon
Image of page 2
This is the end of the preview. Sign up to access the rest of the document.

This note was uploaded on 02/06/2012 for the course AUSV 1320 taught by Professor Johnkelly during the Winter '12 term at Weber.

Page1 / 2

Chapter 12 Assignment — WSU - Chapter 12...

This preview shows document pages 1 - 2. Sign up to view the full document.

View Full Document Right Arrow Icon
Ask a homework question - tutors are online