Checking for a Good Power Feed — WSU

Checking for a Good - Checking for a Good Power Feed WSU http/ Checking for a Good

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
Checking for a Good Power Feed When checking for a good power feed, perform the testing in a live circuit with a DMM. Start the engine to bring the system voltage up to normal. Place one meter lead at the battery positive terminal. Place the other lead at the point where you are testing for a good power feed. A good power feed will show up on the meter as a very low voltage (typically 0.1V or lower). Note: Higher current circuits (headlights, starter, alternator, etc.) will have higher normal voltage readings. The higher the voltage displayed on the
Background image of page 1
This is the end of the preview. Sign up to access the rest of the document.

This note was uploaded on 02/06/2012 for the course AUSV 1320 taught by Professor Johnkelly during the Winter '12 term at Weber.

Ask a homework question - tutors are online