Lab+3+Diode+Circuit+I

Lab+3+Diode+Circuit+I - EECS 70LB Spring 2011 Lab 3: Diode...

Info iconThis preview shows pages 1–3. Sign up to view the full content.

View Full Document Right Arrow Icon

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: EECS 70LB Spring 2011 Lab 3: Diode Circuits I Readings from Scherz: 4.2.1 (How a diode works. A brief reading here will suffice. The physics of diode will be covered in detail in EECS 170A); 4.2.5 (Diode/Rectifier Applications); 3.6.9 (Capacitor Application); Table 3.7 (Capacitor Comparison); 3.6.11 (RC Ripple Filter); Figure 7.61 (Current to Voltage Converter); Summary: There are 2 circuits for this lab designated as 3-1, 3-2 General Measurement Procedure Signal Source: Use a signal generator and power supply to generate A.C. and D.C. voltages. Use an oscilloscope and multimeter for signal verification. Output Measurement: Use an oscilloscope and multimeter to measure the voltage waveforms for A.C. and D.C. signals, respectively. 3-1 Full-wave rectifier (Fig. 4.20, pp 426 and Fig. 3.73, pp 361, Scherz) D1 D1N4148 D2 D1N4148 D3 D1N4148 D4 D1N4148 V1 FREQ = 100k VAMPL = 10 VOFF = R1 1k V V- V+ Fig. 1(a) D1 D1N4148 D2 D1N4148 D3 D1N4148 D4 D1N4148 V1 FREQ = 100k VAMPL = 10 VOFF = R1 1e6 C1...
View Full Document

This note was uploaded on 02/06/2012 for the course EECS 70B taught by Professor Henrylee during the Spring '08 term at UC Irvine.

Page1 / 3

Lab+3+Diode+Circuit+I - EECS 70LB Spring 2011 Lab 3: Diode...

This preview shows document pages 1 - 3. Sign up to view the full document.

View Full Document Right Arrow Icon
Ask a homework question - tutors are online