HW2_4002

# HW2_4002 - EE 4002-1 Homework#2 Name...

This preview shows pages 1–2. Sign up to view the full content.

This preview has intentionally blurred sections. Sign up to view the full version.

View Full Document
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: EE 4002-1: Homework #2 Name: …………………… Due day: 09.29.04 Problem 1 . A DC separately excited motor has the following parameters: P = 2.3 hp, V a = 220 V, n = 6000 rpm, R a = 1.186 Ω , L a = 1.82 mH, K = K f ⋅ I f = 0.331 V/ (rad/s), J M = 0.002 kg ⋅ m 2 , B M = 0.001 N ⋅ m/(rad/s). 1. When the rotor is fully loaded (rated torque): a) Calculate the rated angular speed, rated torque, rated armature current, and the motor efficiency (ignore the field power loss). b) Find the voltage that supplies the armature winding to adjust the speed to 50% of its rated value (maintaining the rated field current). c) Find the percentage of the rated field current to adjust the speed to 130% of its rated value (keeping the rated supply voltage). 2. Simulate (using SIMULINK ® ) the start up of the fully loaded motor if it is supplied from 220 V source and after 0.2 sec. the voltage is reduced to the one found in question 1.b)....
View Full Document

## This note was uploaded on 02/06/2012 for the course EE 4002 taught by Professor Scalzo during the Fall '06 term at LSU.

### Page1 / 5

HW2_4002 - EE 4002-1 Homework#2 Name...

This preview shows document pages 1 - 2. Sign up to view the full document.

View Full Document
Ask a homework question - tutors are online