This preview has intentionally blurred sections. Sign up to view the full version.View Full Document
Unformatted text preview: Assignment #10 PGE 424 w MMS
1. A resistivity log and an SP were used to obtain the following data: Formation resistivity (shallow investigation tool) = 5 ohm m Formation resistivity (deep investigation tool) = 25 ohm m The ratio of the mud ﬁltrate resistivity to the formation brine resistivity is 2.0.
The brine resistivity is 0.05 ohm m. The porosity from a density log is 0.2: (a) Estimate the water saturation in this zone.
(b) Estimate the moveable oil saturation in this zone. (c) Estimate the recoverable reserves (in bbls per acre) for this ﬁeld assuming a formation
thickness of 20 feet and uniform porosity and saturation. 2. The p wave velocity for a formation containing oil and water is measured to be 11,200 ﬁ/sec.
Assuming reasonable values for the ﬂuid velocity compute the following: (a) The porosity of the rock assuming that the formation is a sandstone.
(b) The porosity of the rock assuming that the formation is a limestone. 22 141 50 SHEETS
22442 100 SHEETS
22-144 200 SHEETS 6
AMPAD RecovemML W 0404 —— 0.27.34 = 2 q) gmoveable *- h £311.. ’ .2 , My 3094?; *42540 y se x
:l 15mm WW4 ‘5 WEE 22-141 50 SHEETS
22-142 100 SHEETS
22-144 200 SHEETS 61
_ AMPAD ...
View Full Document
This note was uploaded on 02/13/2012 for the course PGE 424 taught by Professor Sharma during the Spring '10 term at University of Texas.
- Spring '10