HWK 5 - the PPS fluid properties are the default variables....

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
PGE 362 Homework 5 Due at the start of lecture on March 9. (1) Please use the VLP graph you created for HWK 3 and place on it the IPR curve for the following well tests. Show on the graph the maximum theoretical flow rate for each tubing size. 1 1 2 2 500 STBO/Day 3,333 psi 750 STBO/Day 3,000 psi o wf o wf q p q p = = = = (2) Please prepare on the same graph a plot of pwf vs gas flow rate for the current conditions and for the future conditions when reservoir pressure has declined. g 180 deg F 0.67 current 4,000 psi with flow test of 1000 MScf/Day at 3500 psig future 2,000 psi e wf e T p q p p γ = = = = = = (3) Please prepare on the same graph a Vogel’s IPR for the current and future conditions if oil permeability is assumed to be a constant. If not specified below
Background image of page 1
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: the PPS fluid properties are the default variables. Oil = 35 deg API WOR = 0 Initial Tests: 2500 psi 300 STBO/Day at 1500 psi Future 1,500 psi o wf p q p p = = = = (4) Using the PPS “skin” module please make a table showing the perforating skin for each of the following perforating options. (a) The default settings except the reservoir thickness = the completion thickness and the damage permeability = the horizontal permeability. Compare shot densities of 2, 4, 8, and 12 spf and phasing of 0, 90, and 60 degrees for each shot density. (b) Repeat part (a) except change the perforation diameter to 0.35” and the length to 21.5”....
View Full Document

This note was uploaded on 02/13/2012 for the course PGE 362 taught by Professor Bommer during the Spring '08 term at University of Texas at Austin.

Ask a homework question - tutors are online