{[ promptMessage ]}

Bookmark it

{[ promptMessage ]}

Lab_8-Experiment_17

Lab_8-Experiment_17 - Randall Robert(9771 Experiment 17...

Info icon This preview shows pages 1–4. Sign up to view the full content.

View Full Document Right Arrow Icon
Randall Robert (9771) Experiment 17 TUNED AMPLIFIER AND OSCILLATOR EE 3221 – 005 Partner: Jason M.
Image of page 1

Info icon This preview has intentionally blurred sections. Sign up to view the full version.

View Full Document Right Arrow Icon
OBJECTIVE : To study the characteristics of a tuned circuit, a class C amplifier, and a radio-frequency oscillator. Part 1 Connect the circuit show in Figure 1, and apply a sinusoidal signal of about Vp-p to the base of the transistor at a frequency of about 455khz. What is the voltage gain of the ckt? ٠ Gain = 400mv/500mv = 0.80 How large is the dc component of the voltage across the collector resistor compared to the rf signal? ٠ DC Voltage = 15-(VoDC) = 15-10.5 = 4.5V Part 2 Bypass the emitter with a 0.2μF, as shown in Figure 2.
Image of page 2
What does the collector waveform look like now? ٠ X Y -10 -9 -8 -7 -6 -5 -4 -3 -2 -1 1 2 3 4 5 6 7 8 9 10 -10 -9 -8 -7 -6 -5 -4 -3 -2 -1 1 2 3 4 5 6 7 8 9 10 0 Part 3 Bypass the 10k resistor in the collector circuit with a 0.01μF capacitor, add the tuned circuit as show in Figure 3, and remove the 0.02μF capacitor bypassing the emitter. Vary the frequency of the sinal generator until a maximum in signal strength is obtained across the tuned circuit.
Image of page 3

Info icon This preview has intentionally blurred sections. Sign up to view the full version.

View Full Document Right Arrow Icon
Image of page 4
This is the end of the preview. Sign up to access the rest of the document.

{[ snackBarMessage ]}