Textbook42 - Following the prompts on the screen, make sure...

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
Flashing The Hacked Firmware After reading the original firmware and firmtool has completed successfully, you can proceed to flashing the hacked firmware. You should not need to restart your PC in order to flash, but you will need to power off the Xbox 360. Type in the following command, using your Xbox 360 serial number found on the back of the Xbox 360 case. (we’ll use the serial number 1234567 12345 as an example) fBen 1234567 12345 [press enter]
Background image of page 1
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: Following the prompts on the screen, make sure your 360 is OFF and press any key to continue. Press Y to resend the MTK Vendor Intro. Turn on the Xbox 360 and wait 2 or more seconds, status toggles between 0x51 and 0xD1. Turn off the Xbox 360 and wait 2 or more seconds, status will stay at 0xD1. Turn on the Xbox 360, you should get a good drive status 0x73 and erasing should begin automatically....
View Full Document

Ask a homework question - tutors are online