Syllabus(4)

Syllabus(4) - eSyllabus St. Philip's College Course:...

Info iconThis preview shows pages 1–3. Sign up to view the full content.

View Full Document Right Arrow Icon
eSyllabus St. Philip's College AERM1253 001 Spring 2012 Course: Section: Term: HAHN, LESLIE 4867141 lhahn3@alamo.edu Applied Science Building - 100 Aircraft Welding 72170 1 2 Department: Instructor: Phone: Email: OfficeLocation: Course Title: CRN: Lec. Hrs. per wk: Lab. Hrs. per wk: Credit Hours: Topics will address repair procedures for steel, magnesium, brass, and aluminum materials used in aircraft assembly; selection and application of appropriate methods of welding, brazing, and soldering steel, magnesium, brass, and aluminum. Fundamentals of safety procedures will also be addressed. Course Description (e-catalog): For degree and certificate programs students must have completed or have tested at the following levels: ENGL 0301, READ 0302, and MATH 0301. PREREQUISITES, CO-REQUISITES and OTHER REQUIREMENTS: Required Text: 1.Aviation Maintenance Technician Series, Airframe Textbook Volume 2, Dale Crane. Volume 2: ISBN: 9781560276853 2. AC43.13 1B & 2A, Acceptable Methods, Techniques, and Practices, Aircraft Inspection. Repair and Alterations, U.S. Department of Transportation, Federal Aviation Administration. ISBN: 9781560277286 Supplementary Text: 1. AC65 15A, Airframe and Powerplant Mechanics: Airframe Handbook, Department of Transportation, Federal Aviation Administration. ISBN: 1-56027-023-3 2. FAR (Federal Aviation Regulations) Handbook for Aviation Maintenance Technicians, Department of Transportation, Federal Aviation Administration. ISBN: 9781560277467 3. Airframe Test Guide, Dale Crane ISBN: 9781560277422 TEXTBOOKS (including ISBN#) and REQUIRED MATERIALS/RECOMMENDED READING: A study of the materials and procedures for completing a One Hundred Hour/Annual Inspection as per Federal Aviation Regulations and manufacturers service information. Fundamentals of safety procedures will also be addressed. COURSE CONTENT: The student will weld magnesium and titanium; solder stainless steel; fabricate tubular structures; solder, braze, gas-weld, and arc-weld steel; weld aluminum, stainless steel and demonstrate proper safety procedures and critical thinking learning outcomes. At the successful completion of this course, you should be able to demonstrate the following student learning outcomes: 1. Solder, braze, gas weld, and arc weld steel. STUDENT LEARNING OUTCOMES / PERFORMANCE OBJECTIVES: 2/22/2012 Page 1 of 6
Background image of page 1

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon
St. Philip's College AERM1253 001 Spring 2012 Course: Section: Term: 2. Weld magnesium and titanium. 3. Solder stainless steel. 4. Fabricate tubular structures. 5. Weld aluminum and stainless steel. GRADDING POLICY: FAA requires a minimum of 70% to pass each test or project. If you fail, it will be at the discretion of the instructor to reevaluate the failed area. Failure to obtain 70% will result in repeat of the course. Quizzes may be administered periodically to measure student progress and to identify significant learning problems.
Background image of page 2
Image of page 3
This is the end of the preview. Sign up to access the rest of the document.

This note was uploaded on 02/22/2012 for the course ACCT 167 taught by Professor Leung during the Spring '11 term at Mt. SAC.

Page1 / 6

Syllabus(4) - eSyllabus St. Philip's College Course:...

This preview shows document pages 1 - 3. Sign up to view the full document.

View Full Document Right Arrow Icon
Ask a homework question - tutors are online