MIT2_007s09_exam02A

MIT2_007s09_exam02A - MIT OpenCourseWare http:/ocw.mit.edu...

Info iconThis preview shows pages 1–4. Sign up to view the full content.

View Full Document Right Arrow Icon
MIT OpenCourseWare http://ocw.mit.edu 2.007 Design and Manufacturing I Spring 2009 For information about citing these materials or our Terms of Use, visit: http://ocw.mit.edu/terms .
Background image of page 1

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon
Page 1 of 10 2.007 – Design and Manufacturing I Draft Exam on Gears, Springs, Mechanisms, and Drawing This is a practice exam. On the real exam, you’ll have 1.5 hours to answer about 7 questions. This exam is somewhat longer and would take about 2.5 hours by my reckoning. Point allocations (out of 100 total) are listed for each question based on what they’d be worth on the real exam. So, this practice exam adds up to about 160 points. 1. (10 points) Define the term “hysteresis.” Explain its significance for sensors and for energy storage elements (e.g. rubber bands). 2. (10 points) You fill a one liter container with air at 60 psi gauge pressure and plan to use it as a source of power for a machine. The air in the bottle is at thermal equilibrium with the air in the room at 20 degree Centigrade. Estimate the force applied if a valve is opened connecting the reservoir of air to a piston with a three inch internal diameter and a four inch throw.
Background image of page 2
Page 2 of 10 3. (20 points) Sketch the mechanism in a position that places it in static equilibrium. Assume the joints have negligable friction. The drawing is scaled properly in all dimensions so you can estimate any dimensions you need from the figure. Briefly justify your solution with a couple equations, schematic diagrams, and/or a few
Background image of page 3

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon
Image of page 4
This is the end of the preview. Sign up to access the rest of the document.

This note was uploaded on 02/23/2012 for the course MECHANICAL 2.007 taught by Professor Fry during the Spring '11 term at MIT.

Page1 / 11

MIT2_007s09_exam02A - MIT OpenCourseWare http:/ocw.mit.edu...

This preview shows document pages 1 - 4. Sign up to view the full document.

View Full Document Right Arrow Icon
Ask a homework question - tutors are online