Project2guide - INTRODUCTION TO ANALOG INTEGREATED CIRCUITS | PROJECT II Prof Alex LEE School of Microelectronics Shanghai Jiao Tong University Due

Info iconThis preview shows pages 1–3. Sign up to view the full content.

View Full Document Right Arrow Icon
INTRODUCTION TO ANALOG INTEGREATED CIRCUITS | PROJECT II Prof. Alex LEE School of Microelectronics, Shanghai Jiao Tong University 2011/10/11 Due: 10/13/2011 Note: No late work will be accepted. Phase I: Build an Opamp Macro using HSPICE. .subckt my_opamp in_plus in_minus out_plus out_minus av=1 …. .ends [Note] (1) “in_plus”, “in_minus”, “out_plus”, “out_minus” are terminals. They must be used (or connected) every time this opamp macro is called (instantiated). (2) “av” is an optional parameter that has a default value of 1. This parameter may or may not appear when this opamp macro is called. If “av” is not mentioned in an instantiation, then the voltage gain is 1, the default value. If you want your opamp to have a gain other than 1, then “av” must be specified in that particular instantiation, for example: xamp1 inp inn outp outn my_opamp av=5000
Background image of page 1

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon
Background image of page 2
Background image of page 3
This is the end of the preview. Sign up to access the rest of the document.

This note was uploaded on 02/28/2012 for the course MR 401 taught by Professor Alexlee during the Fall '11 term at Shanghai Jiao Tong University.

Page1 / 3

Project2guide - INTRODUCTION TO ANALOG INTEGREATED CIRCUITS | PROJECT II Prof Alex LEE School of Microelectronics Shanghai Jiao Tong University Due

This preview shows document pages 1 - 3. Sign up to view the full document.

View Full Document Right Arrow Icon
Ask a homework question - tutors are online