Bendingbeam2 - Beam Bending Wooden Dowel Alex Lin ME 2011...

Info iconThis preview shows pages 1–2. Sign up to view the full content.

View Full Document Right Arrow Icon
Beam Bending: Wooden Dowel Alex Lin ME 2011 Oct 21, 2009 Introduction The elasticity of an object is important in designing the structure of an object. For instance a bridge needs to be ridged while an archer’s bow must be very elastic. In this experiment we will be finding the elasticity of an object in terms of the Young’s modulus using a three point flexural test. Method The object I studied was a wooden dowel. The exact material is unknown but it is most like made of a hardwood such as oak (“What is a Wooden Dowel?”). To execute the three point flexural test, I needed two supports. For these, I used two chairs of relatively same height. Then I used a Christmas tree stand to hold a yardstick up at the midpoint of the dowel. The dowel was held 33 inches apart by the supports. The suggested width was 26-28 inches but reasonable weights did not lower the beam to 2 inches. For the weights, I attached a rape with hooks on either end to the midpoint of the dowel. This is what I would attach weights onto. The weights
Background image of page 1

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full Document Right Arrow Icon
Image of page 2
This is the end of the preview. Sign up to access the rest of the document.

{[ snackBarMessage ]}

Page1 / 3

Bendingbeam2 - Beam Bending Wooden Dowel Alex Lin ME 2011...

This preview shows document pages 1 - 2. Sign up to view the full document.

View Full Document Right Arrow Icon
Ask a homework question - tutors are online