Lab9.315

# Lab9.315 - Use a curve tracer to determine the ac and dc β...

This preview shows pages 1–2. Sign up to view the full content.

EECE-315 Prelab 9 1. Refer back to your BJT amplifier homework problem and collect the following information: a. The values of all resistors used in the circuit, as well as the value of V CC . b. Your design values of I CQ . c. Your design values of voltage gain. d. Your design value of input resistance. f. Your design value of the output voltage swing. 2. Acquire all of the components you will need to build your BJT design in lab, and bring them to lab.

This preview has intentionally blurred sections. Sign up to view the full version.

View Full Document
EECE-315 Lab 9 1 . Build up the amplifier circuit you designed in homework. Use either 10 uF or 100 uF for all capacitors. Measure all resistors. 2 . Measure the quiescent collector current and compare to your design value.
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: Use a curve tracer to determine the ac and dc β values of your transistor near the measured Q point. 3 . With the measured resistors and β value, calculate the theoretical ac voltage gain, input resistance, maximum up and down swings at the output. 4 . Measure the ac voltage gain at 10 kHz and compare to your original design value, and the value calculated in step 3. 5 . Determine the maximum upward and downward output voltage swing values. Compare to your original design values, and the values calculated in step 3. 6 . Measure the input resistance at 10 kHz and compare to your original design value, and the value calculated in step 3....
View Full Document

## This note was uploaded on 03/11/2012 for the course ECE 185 taught by Professor Ma during the Spring '12 term at CSU Chico.

### Page1 / 2

Lab9.315 - Use a curve tracer to determine the ac and dc β...

This preview shows document pages 1 - 2. Sign up to view the full document.

View Full Document
Ask a homework question - tutors are online